Aluminum awnings for patios – Aluminum awnings are a great way to reduce the glare of the sun. And also reduce the amount of outside heat entering the home. If you are considering adding an awning to your home, you do not need extensive contracting experience or collect all types of materials. You can simply buy a prefabricated awning and has all makes the project done less than 45 minutes by means of a helping hand.
Instructions to install aluminum awnings for patios: Starting with measure the space where the awning will hang. Write down the width and depth in patio. Go to a home improvement store or throw dealer and purchase an aluminum awning that meets your patio size. Situate one ladder during the front patio eaves and the other end of the sail. Driving a linear bead of caulking along the patio eaves with a caulking gun. While your help keeping on the patio in place, you must attach it to the eaves with screws using a screw gun.
While the helper continues to hold at the end of the aluminum awnings for patios climbing on the roof overlooking the awning. Spread more seal between the awning and the eaves. This is known as “marriage in common.” Fold awning brackets down. If appropriate, and set bracket spike against the outer wall of the house. If the brackets are not attached to the awning places them with screws. So caulk the screw holes on both sides to prevent rust. You may have to drill pilot holes in the outside wall with a drill and appropriate bit.