A bed is enough to accommodate two people comfortably large, but many of their smaller rooms, a bed of this size mean little space for other furniture. One queen platform bed frame with drawers below will help you regain some lost storage space without affecting the comfort of the bed provides. Queen platform bed frame cut four pieces of 2-by-4-58 inches long, using the circular saw. Cut four pieces of 80 inches. Cut four pieces of 10 inches. Adjust the pilot bearing 1 inch in the router. Cut a, 1 inch gouge width of 1 inch deep along the 2 inches wide face of two 80-inch pieces using the router. These are the slots in which the slats for adjusting the mattress support. Queen platform bed frame draw 1 inch wide by 1 inch box over 2 inches in width ends spare parts 58 inches and 80 inches long. Cut the boxes using a hacksaw to leave a 1 inches width 1 inch long and 4 inches deep first, on parts. Entwine pieces 58 inches and 80 inches in the grooves to form two rectangular frames. Make sure the bar grooves face each other. Fasten together the joints in frames with long countersunk screws and a drill and a screwdriver. Coat the end faces of parts 10 inch wood glue.