Garage Wall Panels – Let’s start with a simple wall, without opening doors or windows. We can get to the more difficult panel later. The standard height for the panel is 2.453 meters. This is a standard ceiling height for most homes. It also easily accommodates plasterboard and plywood / OSB.
In this article garage wall panels it becomes very important you pay attention. A wall consists of wood with dimensions of 38mm deep and 140mm wide and comes in a variety of lengths, ranging from 2.1 and then rising with the addition of 300mm to 5.4m in length. For the sake of this example, we will use a length of 4.8 m CLS C16 grade wood. The wall we want to make is on the roof of the house, so there are no windows or doors.
Garage wall panels are actually 9.5 m but we need to break it down into a more manageable size. We took a 9.5 m wall and halved to end with two walls of 4.75 m. This is much easier to handle. Divide 4.75 by 0.4 (vertical stud center) to get 11.87. Round the 11th number and then add 2 to bring the number of buttons up to 13. Now you know how many vertical uprights are in the panel.