Parson chair slipcovers – When the chair loses some of its comforts or you note springs protruded through the fabric cover, you must remove the cover and access the bathrooms. Turn the chair so that it lies flat, with his back touching the ground. Remove staples with a staple remove and discard them.
Hold the fabric at the bottom of the chair and begins to peel it off the frame. Remove enough fabric that can access the bottom of the parson chair slipcovers. Find the broken spring in the chair. Remove the clamp screws with a screwdriver and pull the clip of the chair. Remove the clip on the other end of the broken spring. Establish a second screw against the other hole in hinges and tighten. Pull the spring through the structure of the chair.
Wrap a piece of string around the side of the structure of the chair and weave the thread through the spring. Wrap the wire or cord around the opposite side of the chair. Tie a knot in the string and trim the excess. Fold the fabric back on the springs and padding. Place the fabric to the parson chair slipcovers with a staple gun and staples. Hold the staple gun flat against the fabric and push down. Staples should sit flush with the chair and secure the fabric to the frame.broken bottom of parson chair