Patio umbrella stand – Patios are the most beautiful areas of a quiet evening, but sometimes the sun can be a bit much. A lot of furniture playground includes an umbrella, but do not include an umbrella stand. A stand professionally done can be very expensive, especially if you have three or four umbrella that is trying to stand. Fortunately, you can make your own, and there are a couple of ways to make it look beautiful.
Patio umbrella stand, to make the basic support, a five-gallon bucket, 20-inch diameter PVC pipe 2-1 / 2 inches, and some concrete needs – as well as a palette and the tools necessary to mix and manipulate concrete. An assistant is probably a very good idea. Make a thick concrete mix. Place the bucket in the position you want to keep, because when you fill up, the cube will weigh 50 to 60 pounds. Center tube in the bucket is fully upright stick, and then the mixture is poured concrete. Use a trowel or a piece of wood to tamp down the mixture. Let stand to dry overnight and put the umbrella.
Decorations and Options, if the support is in place under a table, you could cut the cube in the middle first. This will allow the holder into place and the table itself compensate for the height difference. The bucket handle break when the concrete is loaded into the bucket. You can build a simple metal handle insert these handles through the plastic bucket before the concrete is on If you have a size-bucket full, you can press some decorative shells, stones or marbles on concrete before it. Decorate the walls with some acrylic paints. This will make the cube a little more attractive, especially if you have several patio umbrella stand in his yard.