Fiberglass shower pan – Finishing a shower of glass fiber can give a quick makeover a dull and drab room bathroom. A little epoxy can shine the existing appearance or provide a complete color change. Some sanding, painting and a healthy respect for the powerful fumes of epoxy paint are all that you need to handle this project home improvement.
Clean the fiberglass shower pan and tray with a gentle cleanser bathroom. Fiberglass dries with paper towels. Use the screwdriver or putty knife to remove all old caulk. Place the pieces on paper towels in the shower, roll up and discard. Sanding fiberglass with sandpaper fine grain. These masks are available in most centers, home improvement. Safety goggles when working with chemicals to prevent splashing into eyes.
Measure and cut the plastic cover material and tape the ceiling zone. If the fiberglass shower pan is the only part that is fiberglass, measuring the plastic and tape the shower walls as well. Apply the epoxy paint on the surface of fiberglass with a brush. Let the paint dry according to the directions on the paint container. Add as many layers as needed to create a final shine. Lightly sand the surface of the fiberglass between layers of epoxy paint will improve the shine and remove any races develop.